Rainwater collector for swimming pools: saving and protecting the environment within everyone’s reach
Using rainwater collectors to fill a swimming pool has many ecological and economic advantages. Indeed, faced with evaporation and water restrictions, this solution not only allows you to save on your water bill, but also to preserve water resources and reduce your ecological footprint.
Why use a rainwater collector for your swimming pool?
Savings on water bills
By using a rainwater collector for your swimming pool, it is possible to make significant savings on your water bill. Indeed, the quantity of water needed to fill a swimming pool can be significant and represent a significant cost if it comes from the drinking water supply network.
Preservation of water resources
Rainwater harvesting also helps preserve natural water resources . Indeed, rainwater is a free resource that can help reduce drinking water consumption and thus help preserve groundwater reserves, which are particularly important during periods of drought.
Reducing the ecological footprint
Using a rainwater collector for your pool also helps reduce your ecological footprint. By limiting the use of drinking water from the network, you are actively participating in the protection of aquatic ecosystems and the fight against the waste of this precious resource.
Types of rainwater collectors for swimming pools
Aerial Recoveries
Above-ground collectors are systems that collect rainwater from roofs and other impermeable surfaces. They can be installed directly on the gutter, or connected to an external tank. These systems have the advantage of being simple to install and inexpensive, but their storage capacity can be limited.
Underground collectors
Underground collectors are tanks placed underground that can store a large quantity of rainwater. This type of system is more discreet than above-ground collectors, but requires a more complex and expensive installation, as well as sufficient space in the garden.
Comparison of efficiency
The effectiveness of the different types of collectors will depend mainly on the volume of water needed to fill the pool and the local climate. Above-ground collectors will generally be sufficient for smaller pools, while in-ground collectors will be more suitable for larger pools or areas with high rainfall.
Treatment and storage of rainwater for the swimming pool
Filtration
Filtration is an essential step to ensure the quality of rainwater used in the pool. Before being stored in a tank, the water must pass through a filter to remove debris and other suspended particles. It is also possible to install an additional filtration system between the tank and the pool to ensure perfectly clear water.
Disinfection
Disinfection of rainwater is necessary to eliminate bacteria, viruses and other microorganisms that may grow in stored water. Several disinfection methods can be used, such as chlorine, ultraviolet or ozone treatment. The choice of treatment will depend on the desired quality criteria and the available budget.
Storage and prevention of water quality problems
Proper storage of rainwater is crucial to prevent water quality problems, such as algae blooms or chemical contamination. Tanks should be opaque to prevent light penetration, sealed to prevent leaks, and equipped with a vent to promote evaporation.
Costs Associated with Installing a Rainwater Harvesting System for the Pool
Cost of collectors
The cost of rainwater collectors varies depending on the type chosen (aboveground or underground), as well as their capacity and the materials used. Aboveground collectors are generally less expensive than underground collectors, but offer less storage capacity.
Cost of installation
Installing a rainwater harvesting system for your pool can be a significant cost, especially if the system you choose is buried. It is essential to hire a professional to ensure a correct and safe installation.
Cost of treatments
The cost of treatments will depend on the type of disinfection chosen (chlorine, ultraviolet or ozone) and the quantity of water to be treated. These costs should be taken into account when evaluating the overall budget for the project.
Tips for choosing the right rainwater recovery system for your swimming pool
Assess your water needs
Before choosing a rainwater harvesting system, it is important to assess your water needs to fill the pool and compensate for losses due to evaporation. This information will help determine the necessary tank capacity and the type of collector suitable.
Consider space constraints
It is also essential to consider space constraints when choosing the system. Above-ground collectors are more suitable for small spaces, while underground collectors require sufficient space in the garden.
Consider local regulations
Some areas may have specific regulations regarding rainwater harvesting and using it to fill a swimming pool, so it is important to research the applicable rules before choosing a system.
By choosing a rainwater collector for your swimming pool, you contribute to the preservation of water resources and save money on your water bill. Don’t wait any longer to adopt this ecological and financially advantageous solution!
